Parameter: Type : Marine 2 cycle piston valve type gasoline engine Displacement (cc) : 26cc Bore x Stroke (mm): 34mm*28mm Dry Weight (g) : 1480g Carburetor : Walbro(Diaphragm butterfly valve type) Maximum Output : 3.3ps /11500rmp(with resonatron) RPM rang : 3300-18000rpm Fuel:Gas/Oil mix 25:1 Lubrication Oil : 2 cycle engine oil Cooling System : Water Cooled

Picture

Click the picture to Enlarge !!!

Spark Plug	26010 x 1
Cylinder	2602B x 1 + M5160 x 4 + Flat Washers x 4
Piston Ring	26030 x 1
Piston Pin	26050 x 1 + 26060 x 2 + 26080 x 2
Piston	26040 x 1
Small End Bearing	26070 x 1
CrankShaft	26092 x 1
Bearing	26100 x 1 + 26101 x 2
Seal Unit	26110 x 2 + 26120 x 1
Crankcase Unit	26132 x 1 + 26142 x 1 + M5160 x 3 + Split Washers x 3
Collets	26152
Trigger Coil	26171
Ignition Coil	26180
Gaskets	26191 x 1 + 26195 x 1 + 26193 x 1 + 26194 x 1
Muffler Gasket	26240 x 2
Carburettor	26201 x 1 £¨WT668B£©
Carburettor Mount	26211 x 1 + M4160 x 2
Veloclity Stack	26220 x 1 + M4400 x 2 + Flat Washers x 2
Starter & Pulley	26320 + 26330
Mounts	26281 x 1 + 26282 x 1 + 26283 x 4
key	26300 x 1
Water-cooled Jacket	26310 x 1 + M4100 x 2 + OR-1 + OR-2
Flywheel	26340
Frame	26284
The information and graphics in this picture react to the product technical characteristic and configuration details when released. Based on the principle of continuous development, Our company reserve the right of changing color , parameter and specification at any time. Please consulting the details when you order.